---
title: "IP Address Restrictions"
slug: "ip-address-restrictions"
updated: 2023-11-07T15:21:58Z
published: 2023-11-07T15:21:58Z
canonical: "wiki.cobblestonesoftware.com/ip-address-restrictions"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://wiki.cobblestonesoftware.com/llms.txt
> Use this file to discover all available pages before exploring further.

# IP Address Restrictions

### **IP Address Restrictions**

**AppConfig: IP Address Restrictions**

To manage **IP Address Restrictions**, navigate to **Manage/Setup** > **Application Configuration** > **IP Address Restrictions**.

![The Application Configuration section of the Main Menu. IP Address Restrictions is highlighted.](https://cdn.document360.io/e3626857-1fb5-4e27-b278-2d3fc5508be4/Images/Documentation/1(233).png)

The **Restrictions Status** drop down determines whether or not IP Address Restrictions are being applied. It cannot be set to Enabled until IP Address Restrictions are specified.

The Restrictions Mode dropdown determines how the restrictions are applied.

- **Only ALLOW Specified IPs:** The designated IP Addresses will be the only ones allowed to access your Contract Insight system.
- **Only DENY Specified IPs:** The designated IP Addresses will be the only ones explicitly restricted from accessing your Contract Insight system.

Click **Add** to add an IP Address Range. Optionally, provide a **Title/Description** for the IP Address Range, as well as specify if it is Inactive. Inactive IP Address Ranges will not be able to apply unless made Active again.

After an IP Address Range is added, click **Manage** to edit its details or click **Delete** to remove it.